Despite the abundance of current non-stick, Teflon, ceramic and other types of pans, numerous Housewives still choose to use cast-iron kitchen utensils. However, in the process of using the frying pan, it gradually becomes covered with carbon deposits. As a result, regular washing may no longer be effective. In this case, you will have to do an “enhanced” cleaning of the pan.
Method 1. Mechanical cleaning
Try using a small amount of sandpaper or a reliable cleaning powder. Everything becomes much easier if you have special tools, such as a drill or grinder. A brush with iron bristles will help to cope with this problem. It should be used very carefully, because it can leave scratches and other unattractive marks. But with careful use, you will be able to get rid of many years of carbon deposits. For the drilling device, you can purchase a special nozzle. With this brush, you will lose much less time and effort.
Method 2. Cleaning with activated carbon
If the carbon Deposit is insignificant, use the activated carbon package. Tablets are crushed to a powdery state and spread over the surface of the pan, slightly filling it with warm water. Leave for an hour or two. Clean the pan with the usual cleaning solutions.
Method 3. Salt and soda
This method is considered the fastest and most effective, but, in addition, universal, suitable for removing many contaminants from the pan of any kind in addition to those that have a non-stick coating. Fresh rust and burnt fat in a cast-iron frying pan should be treated with a slurry of soda ash or salt. Dilute the product with water to a thick pulp. RUB the composition into the rusty spots, leave for 15-20 minutes. With stress, handle a plane with a brush. Rinse with hot running water. To enhance the effect, take salt and soda in equal amounts, and before processing, warm up the pan with hot water.
Method 4. Roasting over a hotplate
In the process of using this method, it is recommended to open all Windows and be sure to turn on the hood, if you do not want to poison your nose with an unpleasant smell. Turn on the hotplate and warm up the pan for 2-3 hours, the soot after this procedure is scraped off much easier, the burning fat loses its grip on the metal surface. After calcination, clean the carbon deposits with a metal brush, it is better to do this over the sink.
Method 5. Silicate glue
The cleaning solution is quite effective, but requires preparation. To create it, you need to take: 700 g of soda, a piece of Laundry soap, two bubbles of silicate glue. Pour the resulting mixture with 12 liters of water, bring to a boil and remove from heat. In the solution, place a frying pan or other container that needs to be cleaned, and leave to cool completely. You may need to do a little scraping.
We hope that our simple tips could help You!